Quality inspection
The manager's nine-point checklist that must pass before a tinting job counts as completed.
What it is
Quality inspection is the last check before a job is finished. When the technician thinks the work is done, they send the job for inspection. A manager then goes through a fixed checklist and either passes the job (it becomes Completed) or sends it back to the technician with remarks.
Who uses it
- Technician: uploads the After photos and clicks Send for inspection.
- Owner / manager (
tinting.manage): ticks the checklist and decides. - Customer: once the job is in inspection or later, they can sign off the finished work in the customer portal.
Why it matters
Bubbles, dust, lifted edges or a knife mark on the glass are what bring customers back angry. A short, fixed checklist means every job is looked at the same way, whoever did it. Passing the inspection is also what completes the job, and that sets off commission, referral rewards and the "job completed" automations, and lets you issue the warranty.
How to use it
Technician: send the job for inspection
- Open the job from Tinting → My day or Tinting → Jobs & quotations.
- In Photos & videos, choose the After category, add the window or area, and upload the finished photos.
- In the Next step strip, click Send for inspection. The status changes to Quality inspection and the page shows "Waiting for the manager's inspection."
If no After photo has been uploaded, you see: "Upload the after photos before sending the job for inspection."
Manager: inspect
- Open the job. The Next step strip says "Complete the quality inspection below."
- Look at the work (in person, or using the After photos and the Before / after slider).
- In the Quality inspection panel, tick each item that is true:
- Film properly installed
- No visible bubbles beyond acceptable limits
- No major dust contamination
- Edges properly finished
- No cutting damage
- Windows cleaned
- Customer requirements fulfilled
- Final photographs uploaded
- Customer approval received
- Type any Remarks.
- Click Pass & complete or Send back.
Pass & complete saves the checklist, marks the inspection Approved and changes the job to Completed with today's completion time. The message is "Inspection passed, job completed."
Send back marks the inspection Rejected, puts the job back to In progress, clears the completion time and adds one to the job's rejection count. The message is "Sent back to the technician." The technician fixes the problem, uploads new After photos and sends it for inspection again.
After a decision, the panel shows the result (Approved or Rejected), the date and time, who inspected it and the remarks.
Rules & limits
- Only users with
tinting.managesee the checklist and can decide. Technicians cannot inspect their own work. - The checklist only appears while the job is in Quality inspection. Before that the panel says it happens once the technician sends the job for inspection.
- To pass, every item must be ticked. If any is missing you see: "Tick every checklist item to approve, or reject with remarks."
- A job cannot be sent for inspection without at least one photo in the After category.
- The number of times a job was sent back is kept on the job and used in technician performance figures.
Tips
- "Customer approval received" is on the list on purpose. If the customer is there, use Sign on this device to collect the Job completion accepted signature first. See Signatures & documents.
- Always write a remark when you send a job back, so the technician knows exactly what to fix.
- After passing, issue the warranty and create the invoice from the same page. See the job card.
- A manager can still move the job on to Delivered with Mark delivered when the customer collects the car.